1.6-50MHz PWR SWR Meter POWER SWR METER 0.5-150W Digital Power Standing Wave Meter Built-in Battery OLED Display
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Specifications:
- Frequency range: 1.6-50mhz
- Power measurement range: 0.5w-150w
- Standing wave measurement range: 1.0-99.9
- Insertion loss: uff1c 0.12db
- Inserted standing wave: u2264 1.02
- Measurement accuracy: better than u00b1 5%
- Standing wave alarm: u2265 2.0 (with closing function)
- RF interface type: sl16-m or n (default m)
- Display content: forward power; Standing wave; Antenna end power; Efficiency
- Power supply: built-in 3.7v/1000mah rechargeable lithium battery or USB type-C
- Shutdown power consumption: uff1c 0.1ua
- Data communication: USB type-C
- Firmware upgrade: supported
- Overall size: 88 x 38 x 64mm/3.5 x 1.5 x 2.5" (excluding protruding parts)
Features:
1. According to the fitting algorithm of detector diode characteristics and double reference subsection detection, the accuracy in the whole power range of 0.5w-150w is better than 5%.
2. There are five interface display modes, which can be selected by one click according to your preferences.
3. High speed average detection mode, real-time efficiency display.
4. Buzzer alarm when standing wave is greater than 2.0.
5. Compatible with open source software code, free code modification brings more fun.
6. USB firmware upgrade does not require a dedicated burner.
7. Built-in lithium battery can be used for more than 50 hours after charging.
8. Multi function keys make it more fun to use and provide an interactive way for adding functions in the future.
Attention:
Continuous transmission in FM or am mode is recommended not to be greater than 110W; SSB or CW can work under the power of 200W for a long time; More than 500W will damage the detection component.
Brief Introduction:
- Long press switch button to turn on/off. Short press to switch display interface, and double-click to switch the standing wave alarm
- There are five kinds of display interfaces, which are automatically saved and automatically called after the next boot
- The charging red light is displayed, and the light is turned off when it is fully charged.
Package Included:
1 x SWR Power Meter
