HGLRC C1 2.4GHz 8CH Built-in ELRS Entry-Level Remote Control for FPV DCL Liftoff DRL RC Racer Drone
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Description:
HGLRC C1 Remote Control
Built-in ELRS: ELRS 2.4GHZ
Built-in ELRS refresh rate: 250Hz
Remote control sensor type: potentiometer sensor
Antenna: built-in ipex1 generation copper tube antenna
Working voltage: 6-8.4v DC
Remote control distance: greater than 500m
Output interface:
TX module NANO bin (crsf protocol)
TYPE-C(only charging and firmware flashing)
3.5MM analog trainer port
Battery: 18650 flat head battery u00d72 (need to be installed by yourself) Charging:
TYPE-C charging current 1.2A
The charging time is about 3-4 hours
Remote control channel: 8 channels
Bluetooth: Bluetooth 4.2
ELRS firmware upgrade method: WIFl or TYPE-C cable brush
ELRS firmware version: ELRS 3.0
ELRS firmware name: DIY devices 2.4 GHz DIY ESP32 + E28 2.4GHz TX Weight: 195g (excluding battery)
Size: 160mmx130mmx50mm (excluding remote rod)
Wireless Dongle
Built-in ELRS Maximum supported frequency: 250hz
Receiving distance: more than 200m
Binding method: Quickly power on and off three times to enter binding mode
Interface: USB TYPE-C+USB TYPE-A double plug
Working voltage: 5v
ELRS firmware upgrade method: WIFI or USB plug
ELRS firmware version: ELRS 3.0
ELRS Firmware Name: HGLRC 2.4 GHz HGLRC Herme 2.4GHz RX External receiver support protocol: only supports CRSF protocol Weight:9.5g
Size: 74mmx21mmu00d712.5mm
Features:
1. Built-in 500mw radio frequency module, which can realize stable signal transmission and remote control distance;
2. The operation procedures are extremely simplified, and common operations such as frequency pairing, power adjustment, and joystick calibration can be realized without a screen, and you can get started quickly;
3. Mix and match design of three-stage switch and two-stage switch;
4. It can be equipped with a wireless dongle, no need to connect a USB data cable when practicing the simulator, and the dongle also has USB-A and USB-C dual interfaces;
5. Support the installation of third-party receivers and tuners;
Package Included:
1x HGLRC C1 Remote Control
1x Remote Control Hanging Strap
1x (Optional) Wireless Dongle
1x USB-C Data Cable
