Display description:nn1. VoltagenMeasurement range: DC8-100VnDisplay formatnuff1c10V display format such as:9.99Vnuff1c100V display format such as:99.9Vnu2265100V display format such as: OLnAccuracy:u00b11%nn2. Percentage Range: 0%uff5e100%nDisplay formatnuff1c10%display format such as: 9%nuff1c100%display format such as: 99%n100%display format such as: 100%nn3. Battery symbolnu2460GraphicalnFive cell symbol, each representing 20%nu2461Display formatnSOC uff1e90% display full cellsn80%uff1cSOC u226490% the first cell is flickernSOCu226480% display four cellsn60%uff1cSOCu226470% the second cell is flicker

Other Function:nn1. Turn on or turn off the display Short press the key to turn on or off the LCD display.n2. Set Full/Cut-off VoltagennYou should set the full and cut-off voltage according to the specifications of the tested battery before use it. The factory default value is full voltage 60V and cut-off voltage 47.5V.nnStep 1: Long press the key to enter the full/cut-off voltage setting interface, which displays 60.0V H (H represents full, L represents cut-off), then release the key;nStep 2: The number flickers from high to low, short press the key to set value, and the full/cut-off voltage setting interface will cycle through. After the setting is completed, long press the key to save and exit the setting state;nnNote: The times of setting the full/cut-off voltage is limited, If it exceeds 50 times, it cannot be set again.nn3. CalibrationnnAll products have been calibrated before leaving the factory. If you think there is deviation, you can calibrate by yourself. The methods are as follows:

Step 1: Long press the key when the meter is powered offnStep 2: Input the standard DC 20V voltagenStep 3: The LCD displays CAL u2192 PASS and returns to the normal display interface that means the calibration is successful, then release the keynn4. Waterproof functionnnThe panel of this product is embedded with a sealing ring. After installation, the panel has the waterproof function of life splash (as shown in Figure 2)

Package includes:

1 x Capacity Tester