STC-3018 12V / 24V / 220V Digital Temperature Controller C/F Thermostat Relay 10A Heating/Cooling Thermoregulator with Dual LED Display
32
Checkout garantit sikur

Oġġetti jistgħu jintirbu sa 40 jum mill-data tar-riċeviment. Oġġetti personalizzati ma jistgħux jintirbu. Oġġetti mixtrija b'gift card jistgħu biss jinbidlu; ma jistgħux jintirbu.
Rigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.
ntFeatures:
nnt
nnt1.Heating or cooling control.Red and blue dual led display
nnt2.Control mode of return difference;Temperature display resolution 0.1
nnt3.Multiple alarm mode selection;Switch between ° C and °F
nnt4.Support temperature correction and support for power loss (the parameters of the sudden power failure are still valid
nnt5.Application range is like home temperature control, farm, various cold storage, greenhouse, aquarium, etc
nnt
nntSpecifications:
nnt
nntDisplay Type:Digital
nntTemperature sensor: NTC 10K
nntSenor length:1.0m
nntTemperature measuring range: -55 ° C ~ 120 ° C / -66°F~248°F
nntResolution: 0.1 ° C
nntAccuracy:±1° C
nntPower supply: 110-220VAC 50/60Hz, 12V DC , 24V DC(Please choose power supply when ordering)
nntPower consumption: <3W
nntStorage temperature: -30 ° C ~ 75 ° C
nntRelative humidity: 20% ~ 85% (No condensate)
nntRelay contact capacity: 10A/240VAC; Heat 10A/240VA
nnt
nntInstruction:
nnt
nntNormal mode: The red digital tube on the left shows the real-time temperature, the blue digital tube on the right shows the set temperature.
nntSetting mode: The red digital tube on the left displays the setting mode, the blue digital tube on the right displays the setting contents.
nnt
nntHow to set the start or stop temperature:
nnt
nntPress the "SET"button onace and the screen flashed,Press the "up" and "Down" button to set the temperature.
nnt
nntLong press "SET"button for 5 seconds to enter set Mode:
nt
ntnttnttt
n
nntPackage Included:nt
nt
nttttt nttttttCode | nttttnttttt ntttttt Function | nttttnttttt nttttttSet Range | nttttnttttt nttttttDefault | nttt
nttttt ntttttt | nttttnttttt nttttttStart or Stop Temperature | nttttnttttt ntttttt-55~120°C/-67~248°F | nttttnttttt ntttttt0°C/68°F | nttt
nttttt nttttttP0 | nttttnttttt nttttttWorking mode | nttttnttttt nttttttH | nttttnttttt nttttttH/C | nttt
nttttt nttttttP1 | nttttnttttt nttttttReturn Difference set value | nttttnttttt ntttttt0.2-30°C | nttttnttttt ntttttt2°C | nttt
nttttt nttttttP2 | nttttnttttt nttttttHigh temperature alarm value | nttttnttttt ntttttt -55~120°C/-67~248°F | nttttnttttt ntttttt120°C/248°F | nttt
nttttt nttttttP3 | nttttnttttt nttttttLow temperature alarm value | nttttnttttt ntttttt-55~120°C/-67~248°F | nttttnttttt ntttttt-55°C/-67°F | nttt
nttttt nttttttP4 | nttttnttttt nttttttTemperature calibration value | nttttnttttt ntttttt-10.0°C~10.0°C | nttttnttttt ntttttt0 | nttt
nttttt nttttttP5 | nttttnttttt nttttttCompressor delay time | nttttnttttt ntttttt0-60Min | nttttnttttt ntttttt0 | nttt
nttttt nttttttP6 | nttttnttttt nttttttDisplay mode | nttttnttttt nttttttC/F | nttttnttttt nttttttC ntttttt ntttt | nttt
nt
nt1 x Temperature Controller
nt1 x Waterproof Sensorn
nt
nn

n
n

n
n

n
n

n

n
n