Type-C USB Input 3A High-current Polymer Ternary Lithium Battery Charging Board 5V-4.2V
83
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Specification:
Main control chip: IP2312
Input voltage: 4.5 to 5.5V
Charging cut-off voltage: 4.2V/4.35V
Charging current: 3A (the current can be changed by adjusting the resistance)
Indicator light: yes
Red: work indicator light
Blue: full indicator light.
Conversion efficiency: 3A 93%, 2A 94%, 1A 95%
IP2312 adopts complete CC/CV charging mode:
When the battery voltage is lower than 3V, it enters the trickle charging mode and charges the battery with a charging current of 100mA.
When the battery voltage is greater than 3V, it enters the constant current charging mode and charges the battery with the set constant current charging current.
When the battery voltage is close to 4.2V and the charging current is less than 300mA, it enters the constant voltage charging mode. After entering the constant voltage mode, stop charging every 4 minutes, and check whether the battery voltage is higher than 4.15V: if it is higher than 4.15V, stop charging; otherwise, continue charging, and then check after another 4 minutes.
When the battery is fully charged, if it detects that the battery voltage is lower than 4.1V, it will start charging the battery again.
Package Include:
1u00d7 3A polymer ternary lithium battery fast charging board
