Home>mall>Toys Hobbies & Robot
0Għoġob

30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

4.3
★★★★★
256
$149.99 / $182.99
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$137.99 / $182.99

Checkout garantit sikur

Rigal b'xejn
Rigal b'xejn ma' kull xiri
Politika tat-tbaħħir
Tbaħħir standard b'xejn fuq ordnijiet ta' aktar minn $9.9
Politika tar-ritorn
Oġġetti jistgħu jintirbu sa 40 jum mill-data tar-riċeviment. Oġġetti personalizzati ma jistgħux jintirbu. Oġġetti mixtrija b'gift card jistgħu biss jinbidlu; ma jistgħux jintirbu.

Rigal B'Xejn

Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.

Politika tat-Tbaħħir

Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.

1. Politika tar-Ritorn

Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.

2.Politika tar-Rifużjoni

Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.

Feature:

1. Uses the mainstream STM32F722 chip

2. Equipped with the latest 42688-P gyroscope

3. 16M onboard black box storage

4. Integrated LC filter

5. Upgraded Type-C USB interface

6. Directly plugs into the DJI Air Unit

7. Paired with the TAKER H100_8S_BLS 100A 4IN1 ESC, providing a smooth flying experience

8. Simple and efficient installation method with shock absorbers for stable gyroscope performance

9. Dual independent BECs: 12V@3A and 5V@3A

10. Supports 8S Lipo batteries

11. Support direct insertion of 8 motors

Specification:

Brand: GEPRC

Model: TAKER F722 BLS 100A 3-8S STACK

Model

Specification

TAKER F722 8S Flight Controller

MCU: STM32F722

IMU: ICM42688-P(SPI)

Air Unit Connection: Direct plugs into DJI Air Unit

Black Box: 16M onboard

USB Interface: Type-C

Barometer: Supported

OSD: BetaFlight OSD w/ AT7456E chip

BEC: 5V@3A,12V@3A dual BEC

Firmware Target: TAKERF722SE

Dimension: 38.5u00d738.5mm,

Mounfing Hole Size: 30.5u00d730.5mmuff0cu03c64mm hole becomes u03c63mm after using a silicone shock-absorbing circle

Input Voltage: 3-8S LiPo

UART: 6 UARTs

Power Filter: Integrated LC filter

Weight: 8.1g Includes

TAKER H100_8S_BLS 100A 4IN1 ESC

Input Voltage: 3-8S Lipo

Ammeter: Support

Calibration value: 200

Continue Current: 100A

Burst Current: 105A (5 seconds)

Support Protocol: Dshot 150/300/600

Size: 56.3*61.1 mm; hole: 30.5u00d730.5 mm; u03c64 mm hole becomes u03c63mm after using the silicone shock-absorbing ring.

Weight: 28.8g

Target: B_X_30

Package Included:

1 x FC board

1 x ESC board

1 x Capacitor

1 x DJI O3 3-in-1 connection cable

2 x FC adapter cable

1 x sh1.0 4pin silicone cable

1 x Camera connection cable

1 x VTX connection cable

1 x XT90 power cable

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts

12 x Silicone anti-shake pads


30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

30.5×30.5mm GEPRC TAKER F722 OSD Flight Controller with 5V 12V BEC & 100A BL_S 3-8S 4in1 Brushless Stack for RC FPV Racing Drones

My cart Cart (252)
My favourites Favourites (0)