3Pcs MAX7219 Dot Matrix Module Microcontroller LED Module Display Module MAX7219 DIY Kit
29
Checkout garantit sikur

Oġġetti jistgħu jintirbu sa 40 jum mill-data tar-riċeviment. Oġġetti personalizzati ma jistgħux jintirbu. Oġġetti mixtrija b'gift card jistgħu biss jinbidlu; ma jistgħux jintirbu.
Rigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.
Description:
u00b7 A single module can drive an 8*8 common negative lattice
u00b7 Module operating voltage: 5V
u00b7 Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
u00b7 With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
u00b7 Modules with input and output interfaces support multiple modules cascade
Wiring instructions:
The left side of the module is the input port, and the right side is the output port.
When controlling a single module, you only need to connect the input port to the CPU.
When multiple modules are cascaded, the input end of the first module connects to the CPU, the output end connects to the input end of the second module, the output end of the second module connects to the input end of the third module, and so on.
Take 51 single chip computer as an example:
u00b7 VCC 5V
u00b7 GND GND
u00b7 DIN_P20
u00b7 CS_P21
u00b7 CLK_P22
Package included:
3 x MAX7219 Dot Matrix Module DIY kit
u00b7 A single module can drive an 8*8 common negative lattice
u00b7 Module operating voltage: 5V
u00b7 Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
u00b7 With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
u00b7 Modules with input and output interfaces support multiple modules cascade
Wiring instructions:
The left side of the module is the input port, and the right side is the output port.
When controlling a single module, you only need to connect the input port to the CPU.
When multiple modules are cascaded, the input end of the first module connects to the CPU, the output end connects to the input end of the second module, the output end of the second module connects to the input end of the third module, and so on.
Take 51 single chip computer as an example:
u00b7 VCC 5V
u00b7 GND GND
u00b7 DIN_P20
u00b7 CS_P21
u00b7 CLK_P22
Package included:
3 x MAX7219 Dot Matrix Module DIY kit
Electronics Ranking