iFlight Commando 8 V2 ELRS 2.4GHz/868/915MHz 8CH Hall Sensor Gimbals EdgeTX/OpenTX Radio Transmitter for FPV Racer Drone
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Description:
-The upgraded iFlight Commando 8 is here, equipped with fully integrated iFlight ExpressLRS hardware, a Temperature Compensated Crystal Oscillator, and an upgraded cooling system. The inclusion of a Temperature Compensated Crystal Oscillator further improves the drone"s performance. These enhancements not only improve the drone"s performance and reliability but also provide a more enjoyable and seamless flight experience for drone enthusiasts.
-No additional external module is necessary to run ELRS. If you"re planning to run another TX module, please check out the optional add-on external module bay.
-ExpressLRS TX modules were developed in close cooperation with the ExpressLRS Team with firmware targets already released.
-Checkout the official ExpressLRS website: https://www.expresslrs.org
-Official ExpressLRS Quick Start: https://www.expresslrs.org/2.0/quick-start/getting-started/
Features:
-Internal iFlight ExpressLRS (ELRS) transmitter (additional fan and aluminum sheet for cooling)
-Backpack Function
-Newly upgraded Temperature Compensated Crystal Oscillator (lower packet loss, high frequency stability)
-Highest quality digital hall sensor gimbals for maximum precision
-High-performance PCB Single Band (900/2400MHz) radio antennas
-Inbuilt 4000mAh for up to 20h power (2x 2000mAh 18650 batteries)
-Stock EdgeTX firmware with pre-installed Lua scripts
-Several Gimbal Stick Ends available (stock 18mm)
Upgrade from v1:
1. Commando 8 v2 adds the Backpack function. Please refer to the following article for the backpack function: https://www.expresslrs.org/hardware/backpack/esp-backpack/
2. Cooling function Upgrade.
3. Crystal Oscillator Upgrade: Upgraded from ordinary active crystal oscillator to TCXO (Temperature Compensated Crystal Oscillator), which can improve the frequency-error problem.
4. Antenna uff2dode Upgrade: ELRS 2.4GHz RX module is changed from single antenna mode to Antenna Diversity mode.
5. Antenna Change: The antenna of ELRS 2.4GHz V2 changed from a single-frequency 2.4GHz antenna to a 2.4GHz single-frequency dual antenna; ELRS 915 V2 antenna remains unchanged.
Antenna Options:
single-band dual antenna(2.4GHz)
Single-Band (868/915MHz)
Button Functionality:
2x 5-axis menu buttons for full OpenTX or EdgeTX control
2x 2-position switches (can be used for arming; not momentary)
2x 3-position switches
RF Power:
2.4GHz system: SX1281
868/915MHz system: SX1276
ExpressLRS 2.4GHz // Max Output 500mW
ExpressLRS 868/915MHz // Max Output 1000mW
Radio Channels: 8
Input: Mini High Precision Digital Hall Gimbals with NMB bearings
Gimbal Stick Ends: 18mm
Charging: Type-C 20W Quick Charge
Battery: Built-in 4000mAh 1S2P 18650 Battery
Charging Connector: Type-C
Weight: 310g
Package Included:
1 x Commando8 Radio Transmitter ELRS V2 (Please select your option)
2 x 18650 Li-Ion batteries included (pre-installed)
