RadioMaster XR3 Nano ExpressLRS ELRS 2.4GHz/900MHz/Dual-Band Multi-Frequency Dual T-Antenna Diversity Receiver for Radiomaster TX16S Boxer GX12 Pocket Radio
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.RadioMaster XR3 Nano ExpressLRS ELRS 2.4GHz/900MHz/Dual-Band Multi-Frequency Dual T-Antenna Diversity Receiver for Radiomaster TX16S Boxer GX12 Pocket Radio
The XR3 Receiver is a versatile, ultra-compact ExpressLRS receiver, measuring just 20 x 15mm. Powered by the advanced third-generation Semtech LR1121 transceiver, the XR3 operates seamlessly on 2.4GHz OR Sub-G 900MHz bands. Whether you"re flying on 2.4GHz or 900MHz, the XR3 delivers exceptional range and sensitivity in a small, lightweight package u2014 perfect for any build. With the reliability of ExpressLRS, you can focus on flying without worrying about link quality.nnDesigned for convenience, the XR3 features built-in Wi-Fi for effortless configuration and firmware updates. Access and manage settings through an intuitive WebUI on your PC or mobile device with ease.
Specification:
Brand: RadioMaster
Item: XR3 Nano ExpressLRS Receiver
Type: ISM2.4, FCC915
MCU: ESP32C3
RF Chip: LR1121
RF Connector: IPEX-1 X 2
Antenna: 2x T-Antenna(Either 2.4GHz, 900Mhz or Dual-band depending on selected package)
Frequency Range: Sub-G 900MHz [ISM FCC915 / EU868]
Telemetry Power: 100mW
Maximum Packet rate: 500Hz /K1000Hz
Minimum Packet Refresh Rate: 25Hz
Working Voltage: DC 5.0 - 12.6V
Weight: 1.3g (Without Antenna)
Dimension: 22mm*15mm*4mm
Firmware Version: ExpressLRS v3.5.1 pre-installed
FW Target: RadioMaster XR3 900 Diversity RX
Bus Interface 1: CRSF
Bus Interface 2: UART
Feature:
* Antenna Diversity for improved signal stability and range
* ExpressLRS Sub-G 900MHz
* ESP32C3 high-performance MCU
* Semtech LR1121 Transceiver
* Additional UART port
* Secondary port for advanced functionality
* Castled pads for easy soldering
Antenna DiversitynThe XR3 receiver features a Skyworks RFX2401C providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance and antenna switching for antenna diversity.nnTailored to Your NeedsnThe XR3 Receiver is available in three configurations, ensuring you have the flexibility to meet your exact requirements: Choose between Sub-G 900MHz or a Dual-Band antenna that allows switching between 2.4Ghz and 900Mhz without an antenna change! All antenna types are available as optional accessories so you can change frequency at a later stage without needing to purchase a new receiver!
Package included:
1 * XR3 Nano Multi-Frequency Antenna Diversity ExpressLRS Receivern2 * T Antenna ( 2.4GHz or 900Mhz or Dual-band depending on selected package)n1 * CRSF Wiren3 * Heat-Shrinkable Tuben1 * Manual Card
